NCD.io Logo
Reset Filters
Show Filters
Reset Filters

Filters

Product Reference: 312573

Industrial Modbus RTU Modem

Industrial Wireless RS485 ModBus RTU Modem User Guide ModBus protocol is one of the most robust and widely used industrial communication protocols. Most all industrial computer, PLC, and SCADA systems supports this protocol. These systems are responsible for controlling and making decisions on a factory floor. Using the ncd.io Industrial Wireless RS485 ModBus RTU Modem, the factory floor systems like PLC and SCADA can read sensor data and make quick intelligent decisions.    How It Works This Wireless ModBus RTU Modem is an extremely simple device. When a sensor transmits data, this modem captures the data and stores it in

Read More »

RS-485 to Wireless Converter Modem Guide

Introduction RS485 to WirelessGetting to Know NCD RS-485 Node ModulesRS-485 Node Module Hardware DescriptionRS-485 Node Jumpers1, 2, 3 Jumpers: RS-485 Bus TerminationBR JumperC  Jumper: Configuration ModeChanging Baud RatesChange the USART Baud RateChange the RS-485 Baud RateFactory Reset ProcedureStandard Version Communications ProtocolAutoEncoder Version Communications ProtocolRead Network ID – AutoEncoderWrite Network ID – AutoEncoderSet Node ID – AutoEncoderRead Node ID – AutoEncoderSet Destination Address – AutoEncoderRead Destination Address – AutoEncoderRS-485 Serial Settings – AutoEncoderCommand Errors – AutoEncoderEmulator Version Communications ProtocolRead Network ID – EmulatorWrite Network ID – EmulatorSet Node ID – EmulatorRead Node ID – EmulatorSet Destination Address – EmulatorRead Destination Address

Read More »

RS-485 Network Quick Start Guide

IntroductionGetting to Know NCD RS-485 Node ModulesRS-485 Node Module Hardware DescriptionRS-485 Node Jumpers1, 2, 3 Jumpers: RS-485 Bus TerminationBR JumperC  Jumper: Configuration ModeChanging Baud RatesTo change the USART Baud Rate, Send the Following Bytes via RS-485:To change the RS-485 Baud Rate, Send the Following Bytes via RS-485:Factory ResetUsing RS-485 with NCD DevicesTesting the RS-485 NetworkIntroduction The NCD RS-485 Communications module make it easy to implement select NCD devices onto a RS-485 bus.  RS-485 is a hardware networking protocol, implementation (selection of devices on the network) requires a software networking protocol.  Many NCD Industrial devices include the E3C command set, which

Read More »