How to NCD-GREpy

Home How to NCD-GREpy
You are using an unsupported browser!

Please upgrade your version of IE to at least 9, or use a modern browser such as Chrome or Firefox.

, , Uncategorized, 0
  1. Install Python 3
    • Visit https://www.python.org/downloads/ for instructions
  2. Install PySerial
    • Visit https://pythonhosted.org/pyserial/pyserial.html#installation for instructions
  3. Download Silicon Labs Driver
    • Visit https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers for instructions
  4. Download the Python Script
    • Visit https://github.com/telliottosceola/Flash_Script
    • Select “Clone or download” button
    • Select “Download ZIP”
    • Unzip the file
  5. Run the script
    • Windows
      • Double click run.bat
    • Linux
      • Run ncd_flasher.py through the terminal
    • Select the COM Port of your Gateway
    • Select the Firmware for the Modem

 

Related Articles
  • IoT Gateways vs IoT Modems – What’s the Difference?+

    IoT Gateways vs IoT Modems – What’s the Difference?

    IoT Gateways vs IoT Modems By now, you have probably seen a wide array of IoT Gateways and IoT Modems in our growing catalog of products.  We don’t blame you if you are feeling a little confusion.  Further complicating the matter, you may also recall the introduction of a MQTT Gateway and a MQTT Modem.  So now it’s time for us to end the confusion and address the topic of IoT Modems and IoT Gateways head on. Defining this terminolo...

  • RS-232 to Wireless Converter Modem Guide+

    RS-232 to Wireless Converter Modem Guide

    Introduction The NCD RS-232 Wireless Modem is designed to act as a RS-232 communications interface between NCD Wireless Sensors and computers or embedded systems equipped with a RS-232 communications port.  This device acts as a 2-Way converter, making it possible to read and configure sensor settings. The wireless range of the Wireless RS-232 Modem may be up to 2 Miles when using a 900MHz communications technology.  Shorter ranges should be ex...

  • WiFi Micro Gateway Setup for Microsoft Azure+

    WiFi Micro Gateway Setup for Microsoft Azure

    WiFi Micro Gateway for Microsoft® Azure® Setup Instructions Introduction The NCD WiFi Micro Gateway allows the complete line of NCD sensors to communicate over the internet to Microsoft Azure using a WiFi connection.  The NCD Micro Gateway is very easy to use, as it only requires network connection credentials and an Azure Connection String.  All sensors are fully encrypted using 128-bit AES encryption.  WiFi communications is also fully enc...

  • WiFi Micro Gateway Setup for MQTT+

    WiFi Micro Gateway Setup for MQTT

    WiFi Micro Gateway for MQTT SETUP INSTRUCTIONS Introduction The easy to use NCD WiFi Micro Gateway allows the complete line of NCD sensors to communicate via the internet to any MQTT broker service using a WiFi connection.  It only requires network connection credentials, connection information about the MQTT host broker, and authentication information for the MQTT connection if applicable.  The MQTT gateway supports connection to MQTT brokers ...

  • endNode Device Configuration+

    endNode Device Configuration

    Device Configuration For the most part, endNode devices need little to no configuration, as the default settings are typically optimal for most applications.  However, there are times when you may need to alter a few settings for specific applications.  endNode configuration is very easy using our Alpha Station software.  Simply click on (A) shown below and the endNode Device Configuration control panel will populate with the current endNode ...

  • 4-Channel 4-20mA Current Loop Input USB Wireless endNode Getting Started+

    4-Channel 4-20mA Current Loop Input USB Wireless endNode Getting Started

    Wireless 4-20mA Current Loop Input with USB Highlights4-20mA Current Loop Input 4-Channel endNode IntroductionWireless 4-20mA InputUSB 4-20mA InputReading 4-20mA Input ChannelsUSB CommunicationsStep 1: Download and Install Alpha StationStep 2: Plug in the USB PortStep 3: Read 4-20mA Input ChannelsWireless CommunicationsLong Range Wireless USB ModemLong Range Wireless Ethernet ModemStep 1: Wireless Serial NumberStep 2: Connect a Wireless ModemStep...

  • Alpha Station – Windows 10 Software for NCD Enterprise Devices

    Learn Alpha Station Learn to Use Alpha Station, it Only Takes a Few Minutes! Download Alpha Station V1.0.1.7 Current Release Version with Source Code Release Date: 1-24-2020 Two release versions as of this post date, this version makes many changes to how sensor data is handled.  This version is expected to improve performance in software reaction time to sensor data.  Changes are significant in structure, so please step back a version if any p...

  • 4-20mA 4 Channel Mirror Product Manual

    Introduction The purpose of this manual is to educate users on the functionality and use of the 4 channel Wireless 4-20mA Mirror Pro product.  Please contact us with any questions you may have on the use of this product. Power Requirements These products are sold with optional power supplies which are recommended for use with the product.  If you must supply your own power supply to the devices then a regulated 9-32VDC power supply source capab...

©2019 National Control Devices, LLC

ncd.io

Made in the USA
5 Year Warranty
Free Shipping on orders over $100
Free Shipping on orders over $100

To learn something new, take the path that you took yesterday. ~John Burroughs

*

Log in with your credentials

or    

Forgot your details?

Create Account