Commands Below are in Hex Format using API Mode. TX = Bytes Sent to the Controller RX = Bytes Received from the Controller.  Note Bytes Received May be Different for Some Commands.

R = Relay
B = Bank (0 = All Banks)
CK = Checksum
TX:23RBCKFunction:RX:23CK
AA03FE6C0017Turn On Relay 1 in All Relay BanksAA015500
AA03FE6D0018Turn On Relay 2 in All Relay BanksAA015500
AA03FE6E0019Turn On Relay 3 in All Relay BanksAA015500
AA03FE6F001ATurn On Relay 4 in All Relay BanksAA015500
AA03FE70001BTurn On Relay 5 in All Relay BanksAA015500
AA03FE71001CTurn On Relay 6 in All Relay BanksAA015500
AA03FE72001DTurn On Relay 7 in All Relay BanksAA015500
AA03FE73001ETurn On Relay 8 in All Relay BanksAA015500

Leave a Reply