Commands Below are in Hex Format using API Mode. TX = Bytes Sent to the Controller RX = Bytes Received from the Controller.  Note Bytes Received May be Different for Some Commands.

R = Relay
B = Bank
CK = Checksum
TX:23RBCKFunction:RX:23CK
AA03FE640110Turn Off Relay 1 in Bank 1AA015500
AA03FE650111Turn Off Relay 2 in Bank 1AA015500
AA03FE660112Turn Off Relay 3 in Bank 1AA015500
AA03FE670113Turn Off Relay 4 in Bank 1AA015500
AA03FE680114Turn Off Relay 5 in Bank 1AA015500
AA03FE690115Turn Off Relay 6 in Bank 1AA015500
AA03FE6A0116Turn Off Relay 7 in Bank 1AA015500
AA03FE6B0117Turn Off Relay 8 in Bank 1AA015500
AA03FE640211Turn Off Relay 1 in Bank 2AA015500
AA03FE640312Turn Off Relay 1 in Bank 3AA015500
AA03FE640413Turn Off Relay 1 in Bank 4AA015500

Leave a Reply