Toggle commands are used to toggle the state of a relay. If a relay is off, the relay will activate when the toggle command is sent. Similarly, if the toggle command is sent again, the relay turn off.
Toggle commands will require ProXR V3.9 firmware or later.
R = RelayCK = Checksum (00-FF)
| TX: | 2 | 3 | 4 | R | 6 | 7 | CK | Function: | RX: | 2 | 3 | CK |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| AA | 05 | FE | 2F | 00 | 00 | 01 | DD | Toggle Relay 1 | AA | 01 | 55 | 00 |
| AA | 05 | FE | 2F | 01 | 00 | 01 | DE | Toggle Relay 2 | AA | 01 | 55 | 00 |
| AA | 05 | FE | 2F | 02 | 00 | 01 | DF | Toggle Relay 3 | AA | 01 | 55 | 00 |
| AA | 05 | FE | 2F | 03 | 00 | 01 | E0 | Toggle Relay 4 | AA | 01 | 55 | 00 |
| AA | 05 | FE | 2F | 04 | 00 | 01 | E1 | Toggle Relay 5 | AA | 01 | 55 | 00 |
| AA | 05 | FE | 2F | 05 | 00 | 01 | E2 | Toggle Relay 6 | AA | 01 | 55 | 00 |
| AA | 05 | FE | 2F | 06 | 00 | 01 | E3 | Toggle Relay 7 | AA | 01 | 55 | 00 |
| AA | 05 | FE | 2F | 07 | 00 | 01 | E4 | Toggle Relay 8 | AA | 01 | 55 | 00 |