Introduction The NCD Component Library makes it easy to integrate ProXR controllers into Microsoft Visual Studio. The NCD Component Library is a complete command set that eliminates most of the detailed programming, allowing you to take control of ProXR controllers using high-level functions. With the NCD Component Library, you will receive over 40 samples from A/D Conversion to Duration and Pulse Timing and best of all, it’s FREE!! We ...
NCD will operate at reduced manufacturing capacity to help ensure the safety of our staff. We are tentatively scheduled to return to full manufacturing capacity in Late April. Please expect extended delays for all orders. Technical support through our community forum and our ticketing system will continue. Phone communications will be by appointment only. We appreciate your understanding during this difficult time. Dismiss
You are using an unsupported browser!
Please upgrade your version of IE to at least 9, or use a modern browser such as Chrome or Firefox.
Store and Retrieve Non-Volatile Memory Introduction Scratchpad Memory allows you to store and retrieve up to 8 bytes of data in a non-volatile EEPROM memory within the NCD device. Scratchpad Memory may be used for anything. The memory contents have no effect of the controller. You can use scratchpad memory to store important variables or use this memory to test for the existence of a particular controller. NCD Base Station Software Use NCD...
EEPROM Memory Commands EEPROM Memory is used to store important parameters within the controller. Many of the ProXR Standard commands have been removed and replaced with EEPROM Memory Commands. In the past, the controller had a separate command for each parameter. This consumed an excessive amount of space within the microprocessor firmware. To save space, we have consolidated all parameter read and write functions into two simple command...
ProXR is a standard set of relay control commands that allow users to control relays by sending bytes of data. Turn relays on or off, trigger timers, flashers, and control relay groups using the ProXR command set. This document will guide you through everything you need to know to start using NCD ProXR series controllers.
What is the API Codec? If you are working with TCP/IP or Wireless communications, you might want to consider using the API Codec to handle all communication functions. The API Codec will “wrap” standard commands with a Header, Byte Counter, and a Checksum, which eliminates the need for timeout command processing (the standard method of communications which stalls processing of commands). he API Codec is a faster, more reliable method of com...
Base Station Base Station Software is our reference tool for designing and testing all currently manufactured NCD Devices. Base Station will assist you in learning how any NCD device functions and will provide valuable diagnostic tools to help determine if your controller is functioning as designed. Base Station software exercises every supported feature of every supported device. It is the ultimate reference tool for learning, diagnosing, ...
