ProXR is a standard set of relay control commands that allow users to control relays by sending bytes of data. Turn relays on or off, trigger timers, flashers, and control relay groups using the ProXR command set. This document will guide you through everything you need to know to start using NCD ProXR series controllers.
EEPROM Memory Commands EEPROM Memory is used to store important parameters within the controller. Many of the ProXR Standard commands have been removed and replaced with EEPROM Memory Commands. In the past, the controller had a separate command for each parameter. This consumed an excessive amount of space within the microprocessor firmware. To save space, we have consolidated all parameter read and write functions into two simple commands, which saves a lot of space inside the MCU. Below you will find an EEPROM Memory Map. This Memory Map shows you what each memory location is used for. The valid parameter
What is the API Codec? If you are working with TCP/IP or Wireless communications, you might want to consider using the API Codec to handle all communication functions. The API Codec will “wrap” standard commands with a Header, Byte Counter, and a Checksum, which eliminates the need for timeout command processing (the standard method of communications which stalls processing of commands). he API Codec is a faster, more reliable method of communicating to NCD devices, particularly when working with network- or wireless-based devices. The API Codec makes communications more resilient to errors and eliminates timeout requirements of standard communication methods.
Base Station Base Station Software is our reference tool for designing and testing all currently manufactured NCD Devices. Base Station will assist you in learning how any NCD device functions and will provide valuable diagnostic tools to help determine if your controller is functioning as designed. Base Station software exercises every supported feature of every supported device. It is the ultimate reference tool for learning, diagnosing, and testing NCD devices. Base Station software works by communicating with your controller to identify the model and provides the appropriate graphical user interface for controlling and testing the identified device. Things You Will