Wireless RTD sensor with node red

Getting started with node red and RTD In this article we will learn how to install and setup node red. install node jshttps://nodejs.org/en/ install NVMhttps://github.com/coreybutler/nvm-windows/releases open command line and switch to node js 12.20.2nvm install 12.20.2nvm use 12.20.2 install node red npm install -g –unsafe-perm node-red Checkout this article for more info How to install node red lib start node redcommand — node-red open a web browser and enter this http://127.0.0.1:1880/ click manage palette and search for ncd-red-wireless install ncd-red-wireless install node-red-dashboard   Build node red flow There are tons of examples and tutorials available on how to build flows. In

Read More »

How To Add a New Sensor In node red

Add a new sensor In NCD node-red lib Recently I started to learn a bit about node-red. Its a graphical based drag-and-drop kind of software platform. Which makes it ideal for users like me who work mostly in hardware and have very little knowledge of the core software. In this guide we will learn how we can add a new sensor in existing ncd node-red lib.  ncd is adding new wireless sensors in their IoT enterprise portfolio and it’s possible that a lot of sensors are not supported in node-red yet. Adding a new sensor in node-red is super easy.

Read More »

Using Node Red to Control the PCA9536

GPIO in minutes If you haven’t already, make sure to go through the setup tutorial. Once you’ve finished that we’re ready to go! The PCA9536 is an 8-pin CMOS device that provides 4 bits of General Purpose parallel Input/Output (GPIO) expansion through the I2C bus. We manufacture multiple mini-modules that utilize this chip, you can check them out here. If you haven’t already, get your devices plugged in, on a Raspberry Pi, that means installing the adapter, hooking up the I2C cable to the In port on the Relay Board, and powering the board. On any platform without native I2C,

Read More »

Using Node Red to Control the MCP23008

Relay control simplified If you haven’t already, make sure to go through the setup tutorial. Once you’ve finished that we’re ready to go! The MCP23008 is a Integrated port expander that controls eight I/O channels through the I2C bus. This is one of our favorite chips to get started with, it is simple to use, and provides some great interactive feedback through the I/O so you can see your project working very quickly. Naturally, when we decided to start building libraries for Node-Red, this was the first product we grabbed. We manufacture dozens of boards that utilize this chip, you can

Read More »

Node Red and Ncd.io Products

Build In the spirit of making hardware more accessible, we’ve had our noses to the grindstone building new functionality for our favorite IoT UI, Node-Red. If you’ve never heard of it, check it out here. If you haven’t used this amazing tool yet, get ready for a treat! Node-Red is a flow-based programming tool that lends itself extremely well to IoT, and comes preloaded with enough functionality to play with that you can easily burn an entire day experimenting. If you are already familiar with Node-Red and how to get it up and running, you can skip this tutorial, just know that

Read More »

NODE-RED WINDOWS INSTALLATION GUIDE

How To install node red on Windows Machine “Node-RED is a visual flow builder that was developed with IoT in mind, you can think of it as a way to build a program without actually writing any code”   We’ll need to follow the below mentioned steps to set up Node-Red Locally on your Windows-10 platform. Install node.js To run Node-Red we need Node.js installed in our system, we can install Node.js by issuing a simple command on the command prompt. 1. In Windows Search, type “cmd” 2. This will open up a terminal, like this one – 3. Right

Read More »
Enterprise Push Notification Dashboard

Node-RED Dashboard – Enterprise 7 Channel Push Notification

Node-RED Dashboard Flow The examples in this series are for use with Node-RED and our Wireless Enterprise line of products. If you haven’t already, check out this post, which will explain the packages required for this flow. This example will set up a dashboard with 2 tabs, one containing current readings, the other showing historical data. All telemetry reported from the sensor is displayed in both tabs. Usage Click on the flow below to copy it to your clipboard. From the hamburger menu on the top right of your flow window, hover over import, click clipboard, and paste in the

Read More »
Wireless Enterprise Accelerometer Dashboard

Node-RED Dashboard – Enterprise Accelerometers

Node-RED Dashboard Flow The examples in this series are for use with Node-RED and our Wireless Enterprise line of products. If you haven’t already, check out this post, which will explain the packages required for this flow. This example will set up a dashboard with 2 tabs, one containing current readings, the other showing historical data. All telemetry reported from the sensor is displayed in both tabs. Usage Click on the flow below to copy it to your clipboard. From the hamburger menu on the top right of your flow window, hover over import, click clipboard, and paste in the

Read More »
Wireless Enterprise ADC Dashboard

Node-RED Dashboard – Enterprise ADC (3.3V)

Node-RED Dashboard Flow The examples in this series are for use with Node-RED and our Wireless Enterprise line of products. If you haven’t already, check out this post, which will explain the packages required for this flow. This example will set up a dashboard with 2 tabs, one containing current readings, the other showing historical data. All telemetry reported from the sensor is displayed in both tabs. Usage Click on the flow below to copy it to your clipboard. From the hamburger menu on the top right of your flow window, hover over import, click clipboard, and paste in the

Read More »