Category: N-Button

Send Email/Text Message with Push Notification Board and N-Button

Here will show you how to use Push Notification board send Email or text message with N-Button Lite software. 1. Connect Push Notification board with your computer. 2. Download, install and run N-Button Lite to show N-Button Lite Manager. 3. Add the connected Push Notification board to Devices Manager. 4. Add a Scan Channel widget to show the status of input channel of Push Notification board on your desktop. 5. Change the input channel status, you will see the color of Scan Channel widget changed also to make sure the board works with N-Button Lite. 6. Right-click the Scan Channel widget to open N-Button Lite Manager again. Click Automation

Read More »

How to Create Relay Status Widget with N-Button

With a few clicks in N-Button software, you can not only create a button to control relay channels, but also create Relay Status widgets to display the status of each relay channel. Here are the steps for how to create Relay Status widget with N-Button Lite software. 1.Be sure you have connected the relay board to your computer with serial port, USB, or Ethernet interface. 2. Download, install and launch N-Button Lite software. N-Button Lite Manager will be shown on your desktop. 3. Click Devices Manager – New to add a device. Input the name for the device – Relay Board Select Manufacturer – National Control

Read More »

How to Export and Import Configuration File for N-Button

N-Button software allows you to export and import devices configuration and buttons or widgets’ setting. It will be much easier to save or switch the settings. Once N-Button Lite or Pro is launched, N-Button icon will be shown on Windows task bar. It’s at the lower right corner of your screen. When you want to save your configuration for devices and created Buttons or widgets, just right-click the N-Button icon to show the Pop-up Menu. Click Export Config File to show Save As dialog. Input the file name (Here is MyButtons). After clicking Save button, all configuration will be saved to

Read More »

Set up USB Push Notification Board with N-Button

This blog will show you how to set up USB push notification contact closure input board to work with N-Button Pro. Plug in power and connect USB push notification board to your computer. Download, install and run the latest N-Button Pro software to show N-Button Pro Manager panel. Click Device Manager –> New to add USB push notification board . Input Name – USB Push Notification Board Select Manufacturer – National Control Devices Select Board Type –  Push Notification Select Com Port – Port Name(Your USB Serial Port #) Select Baud Rate – 115200 Keep the default for other options

Read More »

Set up Ethernet Push Notification Board with N-Button

This blog will show you how to set up Ethernet push notification contact closure input board to work with N-Button Pro. Plug in power and connect the Ethernet push notification board to the SAME network with you computer. Download, install and run the latest N-Button Pro software to show N-Button Pro Manager panel. Click Device Manager –> New to add Ethernet push notification board . Input Name – Ethernet Push Notification Select Manufacturer – National Control Devices Select Board Type –  Push Notification Select Network IP Address –  it should be shown on the Discovered Network Devices list automatically. Double click the

Read More »

Set up Wi-Fi Push Notification Board with N-Button

This tutorial will show you how to set up Wi-Fi push notification contact closure input board to work with N-Button Pro. Plug in power and make sure the Wi-Fi push notification board is on the same network as your computer with N-Button installed. You need to configure the Wi-Fi module to connect to your wireless network. Get details about this configuration in Push Push_Notification_Quick_Start_Guide. Download, install and run the latest N-Button Pro software to show N-Button Pro Manager panel. Click Device Manager –> New to add Wi-Fi push notification board. Input Name – Wi-Fi Push Notification Select Manufacturer – National

Read More »

How to Use the A/D Meter Widget with N-Button

Use N-Button software to create A/D Meters as well as relays. Here will show you how to use N-Button Lite software to create A/D Meter widget for NCD Analog to Digital Conversion controllers. 1. Connect a NCD A/D Analog to Digital board to your computer with USB or Ethernet interface. 2. Download, install, and launch N-Button Lite software, N-Button Lite Manager will be shown on your screen. 3. Click  Device Manager – New to add a device. Input the name for the device: A/D Board Select Manufacturer: National Control Devices Select Device Type: AD1216 Select connection interface of the device Click OK on Device Setting

Read More »

Conditional Relay Control with N-Button

N-Button software allows you to create buttons and widgets to control NCD relay boards.  You can simply turn relays on or off with control buttons , or configure conditional rules to control relays. Here we will show you an example to set up conditional rules to control relays. We will use the push button of Push Notification board to control a relay board. Both of the Push Notification and relay board are from National Control Devices. Example Tasks: When Button 1 is pressed, Relay 1 will turn on for 5 seconds When Button 2 is pressed, Relay 2 will turn on

Read More »

Control Relay with Push Notification Board by N-Button

N-Button software Automation feature allows you to control a relay board using a push notification contact closure controller. That means you can match input channels on push notification boards with relay channels on relay boards to turn on/off relays by changing the status of input channels. Here we will show you how to turn on and turn off relays with push notification buttons using N-Button Lite software. Task: Press Button 1 to Turn On Relay 1 Press Button 2 to Turn Off Relay 1 Step 1. Plug in power and connect your relay board and push notification board with your

Read More »