Day: January 23, 2020

Sensor Configuration Using Micro Gateways

Introduction In this guide we will explain how to configure sensor settings through the Micro Gateways.  This covers The MQTT Gateway, AWS Gateway, Azure Gateway, and all other Micro Gateways. Enter Setup Mode Make sure your Gateway is in Setup Mode.  This is indicated by a flashing Blue LED on the Gateway.  If it is not in setup mode then open the lid, then press and hold the CFG button until the LED begins flashing Blue to enter setup mode. Connect to the Gateway On your computer search for WiFi Networks.  The Gateway should show up in discovered networks as

Read More »