Day: December 6, 2018

Mirror Pro Guide

Device TypesStatus LEDFlashing Green(GOOD)Flashing Red(BAD)Global SettingsDestination AddressBuzzerModelGlobal Device AttributesDevice TypeS3B AddressPoint to Point Contact Closure One WayOverviewContact closure input transmitter board settingsMode(Transmitter)Transmit IntervalInput CountContact closure output receiver board settingsMode(Receiver)TimeoutOutput CountTransmitter ModeReturn StatusPoint to Point Contact Closure Two WayOverview_Transceiver SettingsModeTimeout_Transmit ModeTransmit Interval_Output Count_Input Count_Mate ModeReturn Status_Device Types Mirror Pro is a large product series which consists of several “sub-series”.  This guide aims to cover use of all products in the Mirror Pro series, however not all information in this guide is applicable to all devices in Mirror Pro.  For information specific to your device navigate to the appropriate section in this

Read More »

Weather Report using ThingSpeak MQTT and IFTTT applets

Introduction A cloud-based weather application providing daily weather reports as email notification. This web Application measure Temperature and Humidity using SHT25 and Adafruit Huzzah ESP8266. It provides us with Real-Time Temperature and Humidity data and hourly analytics. The data is sent using ThingSpeak MQTT  API and later we are providing an email notification to the user whenever temperature reaches assigned threshold using IFTTT protocol. SHT25 is a Temperature and Humidity Sensors made by Sensirion. The SHT25 provides a high level of accuracy around ±2% RH. Its Humidity range is between 0 to 100% and Temperature range is between -40 to 125

Read More »